United Machinery & Tools Corporation


Pillar Type Power Press





Specifications

Type Piller Type Power Press Machine
Condition New
Brand Name UMTC
FRAME Made of steel body with high grade quality, properly seasoned, after rough machining. Bearing surfaces are hand scraped.
CRANK SHAFT : Made of special steel stock, to with stand the effective load, properly machined, ground all over, fitted in bushes with high accuracy.
FLY WHEEL : Made of high grade cast iron and is designed to generate the required energy.
BRAKE : The brake is powerful and works on the top dead centre and compensated by springs.
RAM SLIDE : Made of cast iron with high grade quality, properly seasoned, after rough machining. Bearing surface
STROKE : Presses are manufactured with adjustable stroke and adjustable can be made by means of a worm.

Additional Information

Payment Terms L/C, T/T, Other


Technical Specifications

Capacity in Tons 10 Tons 20 Tons 30 Tons 50 Tons 75 Tons 100 Tons 150 Tons 200 Tons 250 Tons 300 Tons
Bed Size 306x355 355x410 410x510 460x510 522x575 586x640 640x690 765x820 865x920 950x1050
Bed to Ram 230 255 295 330 382 435 460 510 612 625
Bolster Thickness 57 57 63 70 78 83 90 102 108 112
Crank Shaft Dia 75 85 100 120 135 170 185 204 230 250
Stroke Length 52 63 83 95 110 115 127 140 152 150
Gear Dia 458 560 615 665 765 910 1020 1225 1275 1350
Fly Wheel Dia 535 665 765 841 920 1070 1148 1275 1326 1500
Hole in Ram for Clamping Die 25 28 32 38 45 51 56 56 63 63
Floor to Top of Bed 625 625 652 652 663 663 690 715 715 800
No. of Strokes in Minute 65 60 55 45 40 35 30 30 30 30
Motor RPM 1440 1440 1440 1440 1440 1440 1440 1440 1440 1440
Motor Power Required in HP 1 2 3 3 5 7.5 10 15 20 25
TECHNICAL DETAILS / SPECIAL FEATURES :- 
PILLAR TYPE POWER PRESS  / INCLINABLE TYPE POWER PRESS

FRAME :  

 

Made of steel body with high grade quality, properly seasoned, after rough machining. Bearing surfaces are hand scraped.

CRANK SHAFT :  
  Made of special steel stock, to with stand the effective load, properly machined, ground all over, fitted in bushes with high accuracy.
FLY WHEEL :  
  Made of high grade cast iron and is designed to generate the required energy.
BRAKE :  
  The brake is powerful and works on the top dead centre and compensated by springs.
RAM SLIDE :  
  Made of cast iron with high grade quality, properly seasoned, after rough machining. Bearing surface are hand scraped, with reamed hole for die clamping.
STROKE :  
  Presses are manufactured with adjustable stroke and adjustable can be made by means of a worm.
ROLLING KEY :  
  The key is "double key rolling type" made out of special alloy steel EN series.
CLUTCH :  
  The clutch is very rigid, better supported, and less liable to suffer damage under heavy operating condition. The Clutch gives continuous stroke for mass production.
EJECTOR & DOUBLE KEY SYSTEM :  
  These are provided specially for the use of springs dies on special order.
LUBRICATION :  
  An efficient lubrication system has been provided to lubricate the sliding surfaces and moving parts.
DRIVE :  
  Presses are usually manufactured motorised but "Belt driven" presses can be supplied by on special orders.
NOTE :  
  (1) The motorised presses are without motor but only the motor - attachment will be supplied with them.
(2) As the machines & Accessories are constantly being improved, we reserve the right to change the design & specifications.